This article contains:

Table of Contents

minLevel	1
maxLevel	7
style	none

1. Overview

The Control Settings page will let you configure control related settings such as Control Ratings, Control Field Configurations, Control Register Configurations, Control Custom Lists, and Control Notification Configurations.

To access the settings page, go to Menu > Framework > Control Settings.

The following settings can be configured:

Tab Name	Purpose
Control Rating	Configure control ratings here.
Field Configuration	Customise the fields which are made visible within the a control record.
Register Configuration	Customise the fields and filters which are made visible within the control register.
Custom Lists	Customise the dropdown list available in the Control Fields area.
Notification Configuration	Configure email and email template notifications here.

2. Control Rating

This settings page enables you to define, edit, and delete the list of rating values for controls, along with the image, colour (to be used in graphs and charts), and sequence.

To configure Control Rating settings, go to Menu > Framework > Control Settings > [Control Rating tab].

To add a new Control Rating:

STEP 1: In the 'Control Rating' tab, click on the Add New button at the top.
STEP 2: In the popup window, enter a 'Rating Type Name'.
STEP 3: Select an image by clicking on Upload Image to upload an image of your choice or click on Select Existing Image to select from a pre-defined set of images, which will be used throughout the system.
STEP 5: Select a Colour from the colour palette for the Control Rating by clicking on the displayed coloured circle. This colour will be used to represent the rating in graphs and charts.
STEP 6: Enter a sequence number to that the Control Rating will be displayed in dropdowns for selection.
STEP 7: Click Save and confirm the new rating by clicking Yes in the confirmation box to add the new Control Rating.

Info
Note: Use the Edit or Delete buttons next to a Control Record to edit or delete an already saved record.

3. Field Configuration

This settings page enables you to configure fields within the Details, Documents, Links, and Assessment (This tab is enabled only when the 'Enable Survey' setting is setup for your organisation.) tabs within the Control Details and Control Records Details pages.

To configure Field Configuration settings, go to Menu > Framework > Control Settings > [Field Configuration tab].

3.1 Control Details Tab

The following features are available in this section:

Rearrange fields according to the order you prefer it to be displayed in the Control Detail page.
Specify a label name to be displayed for each field in the Control Detail page.
Specify a help text to be displayed for each field.
Specify if the Control field is unique per record.
Specify the visibility in the Control Detail and Control Record Detail pages.
Specify the visibility of the field under the 'My Quick Update' page.
Specify if the field is mandatory in the Control Detail and/or Control Record Detail pages.

In addition to the standard fields, the following fields can be customised and activated for the Control templates:

10 Custom text fields – Single line text
10 Custom text fields – Multiline text
20 Custom list fields – Single select list
5 Date fields
5 Numeric fields

3.1.1 Control Field Sequence

To rearrange the order of fields displayed in the Control Detail/Control Record Details pages:

STEP 1: Click the Sequence column of the field you wish to change.
STEP 2: Enter the sequence number you wish to display the field at.
STEP 3: Click Save at the top of the page to save details.

3.1.2 Control Field Label Name

To change a Control field label name displayed in the Control Details/Control Record Details pages:

STEP 1: Click the Label Name column of the field you wish to change.
STEP 2: Enter the new label name to be displayed for that field.
STEP 3: Click Save at the top of the page to save details.

3.1.3 Control Field Help Text

To add a help text to popup when hovered over a Control field in the Control Details/Control Record Details pages:

STEP 1: Click the Help Text column of the field you wish to add a help text.
STEP 2: Enter a help text to be displayed for that field when hovered over it.
STEP 3: Click Save at the top of the page to save details.

3.1.4 Unique Per Record

When Control fields are marked as 'Unique Per Record', details can be maintained uniquely for the same Control, linked to multiple Risks and Compliance records. If fields are maintained as common (not unique/unticked), these fields will appear as Read-Only and cannot be edited. These fields can be updated only via the Control Template.

Info
Note: This setting will be visible once an internal setting 'Enable Functionality To Manage Risk Controls Commonly' is enabled via Camms Support. Once this internal setting is enabled, you can configure this column.

3.1.4.1 Unticked (maintained as common fields)

Fields will appear as Read-Only fields within the 'Control Record Detail' page accessed via the 'Control Record' grids in the Risk Assessment tab (Camms.Risk module) and the 'Control Object' (Camms.Risk Compliance module).
If any updates are required to be made for these fields within the 'Control Record Detail' pages, it will need to be updated via the Master Control Templates in the 'Control Register'.

Example

Fields maintained as Common	Control ABC as a Template (Control Register)	Control ABC Linked to a Risk Record	Control ABC Linked to a Compliance Record
Control Type	Preventative (Can be edited)	Preventative (Read-Only)	Preventative (Read-Only)
Control Owner	John (Can be edited)	John (Read Only)	John (Read-Only)

3.1.4.2 Ticked (maintained as unique fields)

You will be able to edit these fields within the 'Control Record Detail' page accessed via the 'Control Record' grids in the Risk Assessment tab (Camms.Risk module) and the Control Object (Camms.Risk Compliance module).
Editing these fields within a particular Risk/ Compliance Record, will not impact the same field of other Controls Linked to Risk or Compliance Records. Therefore, the details can be maintained in a unique manner against each of these individual records.
This option will be useful if you have different divisions/users handling the Master Control Templates, Risk Controls, and Compliance Controls. This way, any changes done to a Control linked to a specific record, will not impact the other linked records or the Master Template.

Example

Fields maintained as Unique	Control ABC as a Template (Control Register)	Control ABC Linked to a Risk Record	Control ABC Linked to a Compliance Record
Control Type	Preventative (Can be edited)	Corrective (Can be edited)	Directive (Can be edited)
Control Owner	John (Can be edited)	Jack (Can be edited)	Alex (Can be edited)

3.1.4.3 Ticked and Unticked (maintained as a combination of unique and common fields)

Additionally, you can decide if you wish to maintain a combination of fields that can be maintained as Unique and Common. This way, critical fields can be configured as Common fields which will need to be maintained at a Control Template level. And the rest can be configured as Unique fields which will allow you to update these as Required via linked Risk and Compliance Records.

3.1.5 Field Visibility in Control Detail, Control Record Details, Control Record Grid pages

Control Detail Page – This can be accessed by clicking the Control Title within the Control Register. This page will display details maintained against the Control Template.
Control Record Details Page – This can be accessed by clicking the Control Title within the Control Record grid in the Risk Assessment tabs, and the 'Control Object' within a Compliance record. This page will display the details maintained against the Controls linked with the specific Risk/Compliance record.
Control Record Grid – This can be accessed via the Risk Assessment tabs of Risk and the Control object within a Compliance record. This grid will let you add and link to new or existing controls to the Risk and Compliance records.

To make Control fields visible in the Control Details, Control Record Details, or Control Record Grid pages:

STEP 1: Tick the checkboxes, next to the fields you wish to change make visible under the Control Details, Control Record Details, and Control Record Grid columns.
STEP 2: Click Save at the top of the page to save details.

3.1.6 Displaying Fields in the My Quick Update page

To make Control fields visible in the My Quick Update page:

STEP 1: Tick the checkboxes, next to the fields you wish to display in the My Quick Update page.
STEP 2: Click Save at the top of the page to save details.

3.1.7 Mandatory Fields

To make Control fields mandatory or optional in the Control Details, Control Record Details, or Control Record Grid pages:

STEP 1: Tick the checkboxes next to the fields you wish to make mandatory under the 'Mandatory' column.
STEP 2: Untick the checkboxes next to the fields you wish to make optional under the 'Mandatory' column.
STEP 2: Click Save at the top of the page to save details.

3.1.8 Hyperlinked Control Fields

Some fields will have a link that will open up a popup window to configure additional settings. To configure hyperlinked fields:

STEP 1: Click the Hyperlinked field name.
STEP 2: In the popup window, configure any settings in that is required and click Save.
STEP 3: Click Save at the top of the Field Configuration page.

3.2 Documents Tab

The Documents tab for Controls can be enabled by clicking on the 'Show Tab' ON/OFF toggle button. By default this will be turned ON. This will enable a Documents tab within the Control Details and Control Record Detail pages through which documents and URLs can be added for Controls.

Info
Note: Documents will be maintained commonly and not uniquely against linked records.

To enable/disable the Documents tab in the Control Details and Control Record Details pages:

STEP 1: Click the ON toggle button next to the 'Show Tab' field, to enable the Documents tab and click OFF to disable the Documents tab.
STEP 2: Click Save at the top of the page to save details.

3.3 Links Tab

The Links tab for Controls can be enabled by clicking on the 'Show Tab' ON/OFF toggle button. By default this will be turned ON. This will enable a Links tab within the Control Details and Control Record Detail pages through which linkages can be added for Controls.

Info
Note: Links will be maintained commonly and not uniquely against linked records.

To enable/disable the Links tab in the Control Details and Control Record Details pages:

STEP 1: Click the ON toggle button next to the 'Show Tab' field, to enable the Links tab and click OFF to disable the Links tab.
STEP 2: Click Save at the top of the page to save details.

3.4 Control Assessment Tab

The Control Assessment tab for Controls can be enabled by clicking on the 'Show Tab' ON/OFF toggle button. By default this will be turned ON. This will enable a Control Assessment tab within the Control Details and Control Record Detail pages.

Info
Note: The Control Assessment tab will be enabled only the the 'Enable Survey' setting is turned ON.

To enable/disable the Control Assessment tab in the Control Details and Control Record Details pages:

STEP 1: Click the ON toggle button next to the 'Show Tab' field, to enable the Control Assessment tab and click OFF to disable the Control Assessment tab.
STEP 2: Click Save at the top of the page to save details.

Image Removed

Image Added

4. Register Configuration

This settings page enables you to customise and configure fields displayed in the Control Register and the Control Dashboard Popup. Change label names of fields, visibility of fields, searchability in register filters, and sequence displayed in the register.

The following register types will be available to be configured via this settings page:

Control Register
Control Dashboard Popup

To edit a register configuration:

STEP 1: Select the 'Register Type' from the dropdown at the top of the page.
STEP 2: Configure from a list of selected standard and custom fields that are available under each control. The below properties can be set for each column or filter in these registers.

Setting Name	Function
Field Name	The field name in the Control Register or Control Dashboard Popup.
Label Reference	This is the preferred label name for a field displayed in a Control Register or Control Dashboard Popup. To change it, click on the field, edit the name, and click Save at the top.
Visible	This column determines the visibility of the field as a column in the Control Register or Control Dashboard Popup. To make a field visible in the Register, tick this checkbox. To hide a field in the Control Register, untick this checkbox.
Searchable	This column determines the visibility of the field as a filter in the Control Register.
Sequence	This column determines the order in which the columns appear in the Control Register or Control Dashboard Popup, lowest to highest going from left to right.
Width	This column determines the width of each column in the Control Register or Control Dashboard Popup.

STEP 3: Click on the Save button at the top of the page to save any changes made.

Info

Note:

The Visible checkbox will be disabled for the fields which are marked as ‘Unique for Record’ in Field Configuration.
Fields that are marked as ‘Unique for Record’ can still be configured as ‘Searchable’, which will display these fields as filters within the Control Register.

5. Custom Lists

This settings page enables you to add and configure custom lists to be displayed for Controls.

To enter in the list items:

STEP 1: Click on a custom list title to display the list items on the right-hand side panel.
STEP 2: Click Add New to add a new item.

Info
Note: To edit or delete an existing custom list item, click the Edit/Delete button next to the item and edit or delete an already existing item.

STEP 3: You can then start building the list items by entering the description, sequence, and click Save to add it to the table.

6. Notification Configurations

This settings page enables you to configure email templates and emails for Controls.

6.1

Email

Notification Templates

Create Control related email templates with snippets in this section.

Info

Notes:

If the Camms.Risk module is activated for your organisation, then email templates and snippets related to Camms.Risk will be listed here too.
If there are any Control specific templates that were previously created but not linked with any Email Triggers, these will not be available when accessed via Control Settings. These will remain within email configurations under Risk Administration.

To create an email template:

STEP 1: Click on the New button at the top of the page.

STEP 2: Fill in a title, subject, and body for the email template.
STEP 3: To use a snippet, place the cursor in the body where you want to insert a snippet, click on Snippet icon, and select a snippet to be inserted into the email template.

Code Snippets	Snippets Description
Control Title	The title of the control for which the email is being sent to.
Control Type	The type of the control for which the email is being sent to.
Control Owner	The owner of the control for which the email is being sent to.
Control Authoriser	The authoriser of the control for which the email is being sent to.
Control Owner Original Rating	Immediate previous control owner rating for the risk control for which the email is being sent to.
Control Owner Revised Rating	Revised control owner rating for the risk control for which the email is being sent to.
Control Authoriser Original Rating	Immediate previous control authoriser rating for the risk control for which the email is being sent to.
Control Authoriser Revised Rating	Revised control authoriser rating for the risk control for which the email is being sent to.
Control Name List	When consolidated emails are sent, this will show a table with all controls for which email is being triggered displaying the control title, risk code and title of the linked risks, control owner rating and next review date for the controls. This will only be applicable to some triggers and not all.
Control Solution Owner	Responsible officer of the control solution for which the email is being sent to.
Control Solution Next Update	Next review date for the control solution.
Control Solution End Date	End date of the control solution for which the email is being sent to.
Control Solution Completed Date	Completion date of the control solution for which the email is being sent to.
Service Provider	The service profile with which the control is linked to, for which the email is being sent to.
Director Name	The responsible officer of the directorate with which the control is linked to (Camms recommends this not to be used as this has outdated functionality).
Control Solution Name List	When consolidated emails are sent, this will show a table with all controls for which email is being triggered displaying the code and title, control name, start and end dates, status and % complete. This will only be applicable to some triggers and not all.
Linked Records	Linked records of the control.

Image Removed

Image Added

STEP 4: Click the Inset Save button once done to create the email template.

Info
Note: Click the <> HTML button to load the HTML editor view for the templates to define more formatting options other than what is available in the rich text box controller if required.

Image Removed

Image Added

STEP 5: Once added, the email template will be listed. You may edit or delete the template by clicking on the Edit or Delete buttons next to the template.

Image Removed

Image Added

6.2 Notifications

Create Control related email triggers in this section.

Image Removed

Column	Description / Instructions
Trigger Critiria	Select when (time frame) the email needs to be generated. There are two options to choose from (BEFORE or AFTER) the specific date that you are choosing in the options below: Allows you to define the time frame as number of days before or after the review date. Select before/after from the adjacent dropdown and define the number of days in the text box. For example, if you require the email to be sent to recipients 2 days prior to the review, select 'before' and enter number as '2'. The below Control specific email triggers will be available. Control Creation Control Assignment (bulk email) – [CONTROL_NAME_LIST] snippet should be used for the bulk emails to get triggered Control Owner Rating Change Control Authoriser Rating Change Control Solution Creation Control Solution Next Update Control Solution End Date Control Solution Completed Date Control Next Review Date
Recipient	Tick the required boxes to generate reminders only for a particular role/s. Control Owner: The Responsible Officer for the control. Control Authoriser: Control Authoriser person. Control Solution Owner: Control Solution responsible person. Risk Owner Secondary Risk Owner: Once the 'Multiple Risk Owners' setting is enabled via Menu > Framework > Risk Settings > Initial Settings, this recipient type will be available to be configured to sent to all secondary risk owners of Strategic, Operational, Project, and Corporate risks for all email trigger criteria, except for ‘Solution Assignment’ and ‘Control Assignment’ trigger types. If the ‘Secondary Risk Owner’ is configured as a non-mandatory field, emails will be sent out only if the risk has associated 'Secondary Risk Owners'. Obligation Owner Administrator Approver Risk Administrator Submitter
Email Template	Dropdown list of emails templates defined within Risk Settings > Email Templates area will be displayed. Select the desired template for the reminder.
Control Rating	Tick the required boxes to generate reminders only for controls that have the particular control rating/s.

Info
Note: If you require to configure replacing system field label names in the 'Email Reminder' section, please contact Camms Support for assistance.

To create an email trigger:

STEP 1: Select an 'Email Time Frame' with a 'Before' or 'After' x number of days.
STEP 2: Select one or more 'Recipient' groups.
STEP 3: Select a created 'Email Template' from the dropdown.
STEP 4: Select one or more 'Control Ratings'.
STEP 5: Click on the Add button to add the email trigger.

6.3 Email Server Configuration

Set up Control specific email server configurations in this section.

Select the option 'Use inbuilt CAMMS email server ' to keep the default configuration.
Or select the option 'Use your own email server (Please configure details below)' and setup your own custom configuration.
Click Save if any changes are made.

<< Previous section
Risk Settings

Table of Contents

Next section >>
Users and Staff

Versions Compared

Old Version 16

New Version 17

Key

1. Overview

2. Control Rating

3. Field Configuration