Linking Project Risks to a Project and/or Action rules

Owned by amani imtiyas
Last updated: May 27, 2022
1 min read

The rules around Risk and Planning/Project is as below:

  1. If you have created a Risk for an cammsproject PROJECT, the Risk will appear under Project Risks within the Risk Module (under the PROJECT TITLE grouping).

  2. If you have created a Risk for a cammsstrategy planning ACTION, the Risk will appear under the Project Risks within the Risk Module (under the ACTION TITLE grouping).

  3. If you have LINKED your cammsproject PROJECT to the cammsstrategy Planning ACTION, and you create a risk from either the project or action side, then the Risk will appear under the Project Risks within the Risk Module (under the ACTION TITLE grouping – as this takes priority over the project – but should only appear ONCE – not twice).